18 Box Pleat Skirt Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is a pattern and instructions for a box pleated skirt with 18 folds.

Originally, this type of pattern paper is quite difficult to make because of the large number of darts, etc., but this pattern paper is a simplified version.

The advantages are as follows

• The zipper is not attached to the valley fold, so it is not difficult and easy to make.

• The pattern is not divided into multiple sheets, so it is easy to understand.

• The number of darts is about 1/3 of the original one, so it is quicker to finish.

• The hem line is straight, so it is easy to lengthen or shorten the hem.

• The process is easy to make, but the finished product is surprisingly beautiful.

The disadvantages are

• Since the darts on the back folds are omitted, the waist part becomes a little thicker since the difference is processed on top of the darts.

• The seam between the skirts is in the center of the back folds, so depending on the angle, the seam can be seen.

This type of skirt pattern is sufficient for daily wear and cosplay costumes.

Use 22cm invisible zip when making this pattern.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

The production process is explained with translation software.

(1) Sew darts and iron, folding the seam towards the center.

How to sew darts

(2) Serge/overlock the sides of the skirt.

How to Serge/overlock (sewing machine & overlock sewing machine)

(3) Apply stay tape to the planned zipper attachment position.

How to use stay tape

(4) Stitch the zipper portion up to the sewing stop position, pressing seam allowances open with an iron.

(5) Attach a 22cm invisible zipper.

(6) Stitch the remaining sides together to form a loop, pressing seam allowances open with an iron.

(7) Serge/overlock the hem of the skirt, fold it up by 2cm, and sew on a sewing machine.

(8) Shape the iron along the fold lines and creases.

(9) Stitch the seam lines together up to the sewing stop position and press with an iron.

* Leave the seam lines of the zipper portion open without stitching.

(10) Apply fusible interlining to the belt.

Preparation of belt section

(11) Pre-fold the sides of the belt by 1cm using an iron.

(12) Fold along the centerline of the belt.

* When doing this, slightly offset one side of the sandwiched receiving part by about 1mm and iron it out.

(13) Stitch the sides and turn them inside out.

(14) Stitch to the skirt, aligning with the finishing position.

* When the pleats are on the underside, overlap and process the difference with the front.

(15) Sew on Hook & bar eye or buttons.

How to sew on buttons

How to make buttonholes

How to sew the hook

How to sew a hook "bar eye" version

If you cannot see the SHOP due to 403 error

---

---

---