Tiered Pants Sewing Patterns | DRCOS Patterns & How To Make

This is a free sewing pattern for tiered wide-leg pants, designed with three gathered layers for a voluminous and stylish look. The tiers create a flowing silhouette, making these pants perfect for summer wear, loungewear, or festival outfits.

We recommend using lightweight fabrics such as cotton lawn, rayon, voile, or chiffon to achieve beautiful drape and movement. The waistband is elasticated for comfort and easy sizing, so you can choose your size based on hip and length measurements.

Since there is no zipper or button closure, this design is beginner-friendly. A sewing tip: after gathering each tier, divide both the tier and the piece it will attach to into four equal sections. Match these marks before sewing for an even and professional finish.

After printing, align the joining lines, cut out the pieces, and start sewing. The pattern includes a built-in seam allowance (S/A), so you can use it as is without adding extra margins.

The production process is explained with translation software.

If you have any suggestions on how to write like this, please let us know at info@dr-cos.com

We operate this site with your cooperation.

(1) Serging the inseam and sides of the "Front Body" and "Back Body", sew them together and press seam allowances open with an iron.

(2) Serging after sewing the crotch of "Front Body" and "Back Body".

* Sew the crotch in a double layer to increase the strength.

(3) At the fold line on the "Body", fold in twice with an iron and sew with a sewing machine.

* Leave open the part where the elastic can be threaded through the sides without sewing

(4) Serging the sides of "Middle Parts" and "Lower Parts", sew them together and press seam allowances open with an iron.

(5) After Serging the hem of the "Lower Parts", fold in 0.5 inch and sew with a sewing machine.

(6) Gather the "Middle Parts" at the gathering position.

* Gather the "Middle Parts" to match the length of the hem of the body to some extent.

(7) Place gathers at the gather positions of the "Lower Parts".

* Gather the "Lower Parts" to fit the hem length of the "Middle Parts" to some extent.

(8) After sewing "Body" and "Middle Parts" together and Serging,Iron the seam allowance down,Stitching to settle the seam allowance.

(9) After sewing "Middle Parts" and "Lower Parts" together and Serging,Iron the seam allowance down,Stitching to settle the seam allowance.

(10) Thread the elastic through the belt.

Free Paper Patterns are possible because of your support.
If you use our patterns, please share them on social media and tell your friends.
Your support helps DRCOS continue to provide patterns in the future.