Spread shirt Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

It's a design with flared sleeves and a flared hem like a shirt.

The design is such that it gently rests on top of a flared skirt, allowing for a clean line when wearing a panier or similar underneath.

The design is slightly slimmed down in the pattern, so if the size feels tight, please consider purchasing one size up.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

(1) Serge/overlock the connecting surface of the "Front bodice" left front "Extension parts" and the left front of the "Front bodice," divide the seam allowance (S/A) with an iron, and complete the left front of the "Front bodice."

How to Serge/overlock (sewing machine & overlock sewing machine)

(2) Serge/overlock the left and right sides of the "Front bodice," shoulders, and sides of the "Back bodice," as well as both sides of the "Front bodice side," "Back bodice side," and "Sleeve."

(3) Sew the side and shoulder of the "Body" together, divide the seam allowance (S/A) with an iron, Serge/overlock the hem, and fold it up by 1cm (0.5in) with an iron.

(4) Apply fusible interlining to the "facing" and "Collar."

(5) Sew the "facing" together, divide the seam allowance (S/A) with an iron, and Serge/overlock the outer side.

(6) Sew the "Collar" together, turn it inside out, and shape it with an iron for sandwiching.

* Before turning inside out, make notches or cuts in the seam allowance (S/A) of the "Collar" to settle the fabric.

(7) Secure the "Collar" to the "Body" while sandwiching it with the "facing," and also secure the hem by folding it up by 1cm (0.5in).

How to sew Facing and Hem

* Please refer to the instructions for processing the "facing" and hem.

(8) Sew the side of the "Sleeve" together, Serge/overlock the hem, fold it up by 1cm (0.5in), and sew it on a sewing machine.

(9) Attach the "Sleeve" to the "Body" and Serge/overlock the armhole.

How to sew sleeves

(10) Sew on snap buttons at the Sew on snap positions.

How to Sew on snap

If you cannot see the SHOP due to 403 error

Ladies'-S size

Can be downloaded

shoulder width15.4in bust31.5in length28.3in 24sheets of A4 size(or legal size)
Sleeve parts 40 size

---

Ladies'-M size

Can be downloaded

shoulder width15.7in bust33.9in length29.1in 26sheets of A4 size(or legal size)
Sleeve parts 42 size

---

Ladies'-L size

Can be downloaded

shoulder width16.1in bust37in length29.9in 27sheets of A4 size(or legal size)
Sleeve parts 46 size

---

Ladies'-LL size

Can be downloaded

shoulder width16.5in bust40.2in length30.7in 29sheets of A4 size(or legal size)
Sleeve parts 50 size