Sleeveless jacket Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is the pattern and instructions for making a sleeveless jacket with an open zipper on the front and lining attached.

The front bodice features dart lines, while the back bodice combines princess lines, resulting in a pattern that creates a beautiful flare from the waist.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

* Make incisions in the seam allowances where the fabric will pull if you turn it inside out.

(1) Sew the darts on both the right side and the lining of the "Front bodice" and press them with an iron.

How to sew darts

* When pressing the darts, press them in opposite directions on the right side and the lining to reduce thickness.

(2) Fold and press 1 cm (or 0.5 in) of the zipper portion of the "Front bodice" right side & lining, and the hem portion of the "Back bodice" right side & lining.

(3) Sew the shoulders, sides, and back center of the "Front bodice" right side & lining, and press the seam allowances open with an iron.

* When sewing the back center, sew it with the hem folded 1 cm (or 0.5 in).

(4) Attach fusible interlining to the lining of the "Collar" and "Collar stand."

How to make collar

How to sew Collar stand

(5) Sew the right side "Collar" to the lining "Collar stand," and the lining "Collar" to the right side "Collar stand," and press the seam allowances open with an iron.

(6) Sew the "Collar stand" to the right side & lining of the bodice, and press the seam allowances open with an iron.

(7) Fold and press 1 cm (or 0.5 in) around the entire bodice right side & lining (including armholes).

(8) Cut the seam allowance areas that may pull the fabric, such as darts, side seams, armholes, and hem, before pressing with an iron.

(9) Attach an open zipper at the zipper position, and sew lace or patterned fabric with topstitch, sandwiching it between the right side & lining.

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---