Spread sleeve Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is the pattern for sleeves with a slightly flared line towards the hem.

The biceps area is wrapped with bias tape, and elastic is inserted inside to attach it to the arm.

It's recommended for when you want to create a slight flare at the cuff using a single pattern piece.

Using a thick lining fabric will make the line clearer, resulting in a beautiful sleeve.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

The production process is explained with translation software.

(1) Sew together the side of the "Sleeve" right side and lining, then press open the seam allowance with an iron.

* When pressing with an iron, make notches to settle any areas where the fabric is puckering.

(2) Turn the lining inside out and tuck it into the right side, then sandwich the upper part and hem of the "Sleeve" with bias tape.

How to make bias tape

How to sew bias tape

* Make a hole for elastic in the bias tape of the upper part of the "Sleeve," around 2cm in size, sew it, thread the elastic through, then close it.

If you cannot see the SHOP due to 403 error

Children's-140 size

Can be downloaded

upperarms8.9in 4sheets of A4 size(or legal size)

---

Ladies'-S size

Can be downloaded

upperarms9.6in 4sheets of A4 size(or legal size)

---

Ladies'-M size

Can be downloaded

upperarms10.4in 6sheets of A4 size(or legal size)

---

Ladies'-L size

Can be downloaded

upperarms11.2in 6sheets of A4 size(or legal size)

---

Ladies'-LL size

Can be downloaded

upperarms12in 6sheets of A4 size(or legal size)

---

Men's-L size

Can be downloaded

upperarms12.8in 6sheets of A4 size(or legal size)

---

Men's-LL size

Can be downloaded

upperarms13.6in 6sheets of A4 size(or legal size)