Comments are made using translation software.
This is a pattern and instructions for an off-shoulder cut-out T-shirt.
This T-shirt features a design with open shoulders, making it suitable for outings, loungewear, and as a base for cosplay costumes.
Please make it using a slightly soft knit fabric material.
For edge finishing, please use bias tape made from the same material or knit bias tape.
After printing, paste it according to the pasting line,Cut and use.
The pattern has a seam allowance, so it can be used as is.
I'm not so good at English.
So all explanations/instructions were translated using AI.
This is not always perfect and I apologise for any parts that are difficult to follow.
(1) Sew together the shoulder and side of the front "Back bodice", then Serge/overlock.
How to Serge/overlock (sewing machine & overlock sewing machine)
(2) Serge/overlock the top of the "Sleeve", then fold in 1cm (0.5in) and sew on a sewing machine.
(3) Sew together the sides of the "Sleeve", then Serge/overlock.
(4) Serge/overlock the "Body" hem and "Sleeve" hem, then fold 1cm (0.5in) to the inside and sew on a sewing machine.
(5) Make cuts at the "Sleeve" attachment position on the armhole, then sew the "Sleeve" in place and Serge/overlock.
(6) Finish the remaining armhole edge with bias tape by Serge/overlock, then reinforce by overlapping while attaching the "Sleeve" portion.
(7) Serge/overlock around the neckline with bias tape.
If you cannot see the SHOP due to 403 error
bust33.1in length23.2in 11sheets of A4 size(or legal size)
Sleeve parts 44 size
bust35.8in length23.6in 11sheets of A4 size(or legal size)
Sleeve parts 46 size
bust39in length24in 11sheets of A4 size(or legal size)
Sleeve parts 48 size
bust41.3in length24.4in 11sheets of A4 size(or legal size)
Sleeve parts 51 size
Paper pattern & how to make
How to use Paper pattern
Each process How to make
Shop
X(Twitter)
pinterest
Instagram
facebook
Contact Us/Q&A
Japanese Site