Little Redriding Hood Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is a pattern designed with the image of Little Red Riding Hood in mind.

Unlike a hood, it features a pointed tip for the hood, and the hood itself is larger.

We focused on creating a line that emphasizes the sagging of the hood around the neck when worn.

Although there is a pattern for a ribbon included, you can easily finish it using commercially available ribbons or lace for simplicity.

It's a simple structure where you just need to paste two pieces together and flip them inside out, so even beginners can easily make it.

Feel free to customize it for various purposes such as cosplay, Halloween costumes, or stage costumes.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

(1) Sew the sides of the "Front bodice" and "Back bodice" together, and press the seam allowances open with an iron.

* It will look neat if you press the seam allowances open and finish with top stitching, then trim the excess seam allowance.

(2) Sew the "Hood" together, and press the seam allowances open with an iron.Stitch and trim the seam allowances.

* Stitch and trim the seam allowances.

(3) Sew the "Hood" to the "bodice," and press the seam allowances open with an iron.

* Stitch and trim the seam allowances.

* Make two identical pieces for the lining using the same steps.

(4) With the "bodice" and "Lining" right sides facing, pin them together with a marking pin and sew all around from the start to the end point.

(5) Turn it inside out through the opening and shape it with an iron.

(6) Pin the lace around the marked lace position and sew it together with the open part.

(7) Shape the "Ribbon" with an iron and sew it with top stitching.

(8) After shaping the "Ribbon Core" with an iron and sewing it with top stitching, wrap it around the "Ribbon" and sew it by hand.

(9) Attach the "Ribbon" to a flower pin or similar item.

(10) Attach the spring hook to the designated position.

How to sew the hook

How to sew a hook "bar eye" version

* It is also cute and recommended to simplify by attaching store-bought ribbons or lace ribbons to the spring hook position instead of making the ribbon part.

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---

---