Hanfu 2 Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

Here is the pattern for a Hanfu, which has been requested by many.

This is a simplified pattern for a Hanfu, suitable for cosplay, stage costumes, party costumes, etc., rather than an authentic one.

If you want to make an authentic one, please refer to specialized books on Hanfu.

It's designed to be simple.

It's highly recommended for casual wear as well, very comfortable.

The sleeve length, equivalent to the "yukitake" in a kimono, is slightly longer. If it feels too long, please adjust it before use.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

* This pattern is designed as a simplified version of Hanfu specifically for cosplay costumes.

For making authentic Hanfu, please refer to specialized books.

Additionally, since this is a simplified version, it does not include lining.

If you want to add lining, please use the pattern accordingly.

(1) Sew the back center line of the "Body" together, serge/overlock the seam allowance (S/A), and press the seam allowance (S/A) to one side with an iron.

How to Serge/overlock (sewing machine & overlock sewing machine)

(2) Sew the "Okumi" to the "Body", serge/overlock the seam allowance (S/A), and press the seam allowance (S/A) to one side with an iron.

(3) Sew the "Sleeve" to the "Body", serge/overlock the seam allowance (S/A), and press the seam allowance (S/A) to one side with an iron.

(4) Serge/overlock from the front side of the "Front bodice" along the hem → side → sleeve cuff.

(5) Serge/overlock from the sleeve cuff of the "Back bodice" along the side → back hem → side → sleeve cuff.

(6) Make the "Coad" with a French seam, turn it inside out, and shape it with an iron.

(7) Fold the edges of the "Decorative collar" by 1cm (or 0.5in) and sew it with a topstitch to the decorative collar position on the "Collar".

(8) Fold the dotted center line and side dotted line of the "Collar" by 1cm (or 0.5in) to prepare it for pinching.

(9) Fold the "Collar" right sides together, pinch the "Coad" at the pinching position, sew along the thick dotted line, turn it inside out, and shape it with an iron.

(10) Sew the sides of the "Body" up to the sleeve cuff and press the seam allowance (S/A) open with an iron.

(11) Fold the front side of the "Okumi" inward by 1cm (or 0.5in) along the hem with an iron and sew it with a sewing machine.

(12) Pinch and sew the "Collar" to the "Body".

(13) Sew the "Cuff" into a ring, press the seam allowance (S/A) open, fold it by 1cm (or 0.5in), pinch it to the "Sleeve", and sew it.

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---