Eboshi Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is a pattern for an eboshi, a type of hat worn by aristocrats during Japan's Heian period and other eras.

It's not an authentic eboshi but rather a pattern designed specifically for cosplay.

This hat is designed to be fastened to the head using strings or ties attached to the sides.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

(1) Attach the Interlining to the “Lining” and “Lining side”

* Secure the fusible interfacing to the lining with stitching along the dotted line.

(2) Sew the “Lining” and “Lining side” together, then press the seam allowances open with an iron.

(3) Fold in 2 cm on the “Lining” at the marked “Fold in 2 cm” line and press with an iron.

(4) Sew the “Front side” and “Front” together, then press the seam allowances open with an iron.

(5) Fold up the hem by 1 cm and press to shape it.

(6) Place the “Front” over the “Lining” and fold the seam allowance inward on the lining side.

(7) Secure the folded edges by stitching from the front side with a sewing machine or hand-stitching.

(8) Attach eyelets at the marked Eyelet positions and thread the cord through.

If you cannot see the SHOP due to 403 error