Double Vest 4 Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is a pattern and instructions for a slightly fitted design double-button vest with a tailored collar.

It comes with a lining pattern, and the pockets are mock pockets.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

(1) Sew the “Dummy pocket” to the Dummy pocket position on the left chest of the front bodice.

(2) Sew the darts on both the “bodice” and the “lining,” then press the darts with an iron.

How to sew darts

* Press the darts on the “bodice” toward the center and those on the “lining” in the opposite direction.

* Add notches to areas where the fabric is taut, including the darts.

(3) Sew the back center, sides, and shoulders of both the “bodice” and the “lining,” then press the seam allowances open with an iron.

* Add notches to areas where the fabric is taut in the side seam allowances.

(4) Attach the “Fusible interlining” to the “Facing,” then connect the front lining and front facing before pressing them into place with an iron.

(5) Sew the “Front facing” and “Front bodice lining” together, then press the seam allowances open with an iron.

* Add notches to areas where the fabric is taut in the seam allowances.

(6) Fold the seam allowances of the armholes on both the “bodice” and the “lining” inward with an iron.

(7) Sew the “Collar (back side)” to the “bodice” and the “Collar (front side)” to the “lining,” each up to the "Collar" stitching position.

(8) Sew the “bodice” and “lining” together around the edges, leaving one Position to turn inside out open. Turn the garment inside out and finish by sewing the open area with topstitching, including the surrounding edges.

(9) Topstitch the armhole area.

(10) Create buttonholes on the side that will face outward when worn and attach decorative buttons.

How to sew on buttons

How to make buttonholes

(11) Attach the main buttons to the side that will face inward when worn.

(12) Attach snap buttons to the Snap button position.

How to Sew on snap

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---