Comments are made using translation software.
This is a pattern for a double-button vest with a slightly open neckline and distinctive lines at the hem.
As it's finished with bias tape around the edges, there are no facings, making it a simple construction of sandwiching the same-shaped lining.
Feel free to use it as a base for cosplay costumes.
After printing, paste it according to the pasting line,Cut and use.
The pattern has a seam allowance, so it can be used as is.
The production process is explained with translation software.
(1) After sewing the "bodice" and "lining" darts together, iron them down.
* darts should be tipped toward the center of the body,Lining should be tipped in the opposite direction.
* The darts should be tipped toward the center of the body.
(2) After sewing "Front bodice" and "Front bodice side" together, press seam allowances open (same process for the lining).
* Cutouts should be made at the curves of the seam allowance and at the darts.
(3) Sew the "Back bodice" center, sides and shoulders together, then press seam allowances open (same process for the lining).
* The curve of the seam allowance should be incised.
(4) Turn the seam allowance of the armholes of "bodice" and "lining" inward, iron it into shape, and sew it in place.
* The curve of the seam allowance at the armhole should be incised.
* If the fabric floats, topstitch around the armhole to calm it down.
(5) basting 0.1 inch (≈2mm~3mm) around the "bodice" and "lining".
(6) Sew around the perimeter with bias tape.
(7) Make a buttonhole on the outer side of the "bodice" and sew a decorative button.
(8) Sew the main button to the inside of the "Bodice".
(9) Sew a snap button at the snap button position.
How to purchase pay pattern from overseas