Double Vest Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

Here is the pattern and instructions for a slightly tight-fitting double-button vest.

This pattern includes lining, and the pockets are mock pockets.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

(1) Sew the “Dummy pocket” to the Dummy pocket position on the left chest of the front bodice.

(2) Sew the darts on both the “bodice” and the “lining,” then press the darts with an iron.

How to sew darts

* Press the darts on the “bodice” toward the center and those on the “lining” in the opposite direction.

* Add notches to areas where the fabric is taut, including the darts.

(3) Sew the back bodice center → sides → shoulders of the “bodice,” then press the seam allowances open with an iron.

* Add notches to areas where the fabric is taut in the side seam allowances.

(4) Attach the “Fusible interlining” to the “Facing,” then connect the front lining and front facing before pressing them into place with an iron.

(5) After sewing the back lining center together, connect it with the back facing and press it to settle the shape.

(6) Sew the sides → shoulders of the lining, and press the seam allowances open with an iron.

* Make small cuts in the seam allowances at areas where the fabric pulls at the sides.

(7) Pre-fold the seam allowances of the armhole portions on both the “bodice” and “lining” using an iron.

(8) Pre-fold the Fold line on the inner side of both the “bodice” and “lining” with an iron.

(9) With the right sides of the “bodice” and “lining” facing, sew around the edges, leaving the areas folded in (8) open.

(10) Before turning the fabric inside out, trim any pulling parts of the seam allowances and cut the corners.

(11) Use an iron around the edges to settle the shape.

(12) Apply top stitching around the edges, including the area left open for turning.

* When applying the top stitch, sew the open area closed as well.

(13) Close the armhole portion with a top stitch.

(14) Create buttonholes on the outer side and sew decorative buttons.

How to sew on buttons

How to make buttonholes

(15) Sew the main buttons on the inner side corresponding to (14).

(16) Sew snap buttons at the snap button positions.

How to Sew on snap

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---