Corset Sewing Patterns | DRCOS Patterns & How To Make

This is a sewing pattern for a corset designed to closely fit the body shape.

The design is made of 7 panels to create a well-fitted and structured form.

It uses an open zipper at the back for wearing and removal.

You can use this pattern as a base material and customize it as needed.

After printing, align the pages along the guide lines, tape them together, and cut out the pattern pieces before use.

The seam allowance is already included in the pattern, so you can use it as it is.

(1) Sew the "Front body", "Front side body", "Back side body", and "Back body" together.

(2) Press the seam allowances open with an iron, open them with topstitching, and trim the excess seam allowance.

(3) Make the lining in the same way as steps (1) and (2).

(4) Fold 1 cm at the center back of both the outer fabric and lining, and press with an iron to set the shape.

(5) Sew the top edge and bottom edge of the outer fabric and lining together. Trim tight or bulky seam areas, then turn the garment right side out and press with an iron to shape.

(6) Attach an open zipper at the center back.

(7) Apply topstitching along the top edge and bottom edge.

Free Paper Patterns are possible because of your support.
If you use our patterns, please share them on social media and tell your friends.
Your support helps DRCOS continue to provide patterns in the future.