Acute Jacket Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

*The pattern for the white jacket in the reference photo. Black inner pattern paper is available separately.

The pattern and method of making a jacket with a sharply pointed hem tip.

Sleeve decorations in the reference photo are finished with synthetic leather or hard enamel material.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

(1) Serge/overlock the center, shoulders, and sides of the “Front Body” and “Back Body” and the sides of the “Sleeve.”

How to Serge/overlock (sewing machine & overlock sewing machine)

(2) Make a notch in the hem of the “Sleeve,” fold the hem forward with an iron, and sew on the “Sleeve decorative parts.”

(3) Sew the side seams of the “Sleeve,” then press the seam allowance open with an iron.

(4) Sew the center of the “Back Body” and the shoulders and sides of the “Body,” then press the seam allowance open with an iron.

(5) Fold the center of the “Front Body” 1 cm (or 0.5 in) inward and press it with an iron.

(6) Sew the hem of the “Body” with bias tape.

How to make bias tape

How to sew bias tape

(7) Attach an open zipper to the “Body.”

(8) Insert Fusible interlining into the “Collar,” sew it together, and turn it right side out.

* Pre-fold the section for attaching to the Body 1 cm (or 0.5 in) with an iron to shape it.

* Trim or notch areas where the fabric pulls while turning it right side out.

(9) Insert the “Collar” into the “Body” and sew it in place.

(10) Attach the “Sleeve” to the “Body” and finish the edges.

How to sew sleeves

If you cannot see the SHOP due to 403 error

---

---