Tights 3 Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

We've received many requests and created a pattern for tights with heels, which surprisingly proved to be quite challenging.

Once you see the shape, you'll be like, "Ah... so that's how it's done!" (laughs)

We've made them a bit longer, so they can be used as a base pattern.

The sizes are based on foot size and inseam length. Depending on the stretchiness of the fabric you use, if it has a high stretch rate, consider going one size down, and if it has a low stretch rate, consider going one size up.

When sewing, please use Eiffel sewing thread. For fabrics with low stretchability, please use Regilon knit sewing thread, and switch accordingly during construction.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

The production process is explained with translation software.

* Please use two-way stretch material during the production.

* If the two-way stretch material requires edge finishing, please finish all the edges beforehand.

How to Serge/overlock (sewing machine & overlock sewing machine)

(1) Sew the heel position of the "Back bodice" and "sole of the foot" together, matching the position.

(2) Sew the "Front bodice" and "Instep" together.

(3) Align the "Instep" with the matching position and sew it around the "sole of the foot".

(4) Sew the sides of the "Front bodice" and "Back bodice" together.

(5) Fold the opening 1cm (or 0.5in) and sew it with a sewing machine.

* When using highly stretchable or slippery two-way stretch material, please insert elastic into the opening.

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---