Swallowtail Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is a simplified pattern for a tailcoat.

The chest pocket is a dummy pocket, and there is no lining for simplicity.

As the tail portion is made extremely long, it's not intended for formal party use.

Mainly, it's for use in events such as cosplay, stage costumes, dance costumes, fancy dress, Halloween, etc.

If you desire a lining, I've marked the facing line, so you can create a lining pattern from there.

Since the front design is open, there is some flexibility in sizing, but

During pattern drafting, I've slimmed it down a bit, so if you plan to layer underneath, it's recommended to go one size up.

The collar is also made quite narrow, so if you're concerned, feel free to make it wider.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

The production process is explained with translation software.

(1) Apply fusible interlining to "Front facing", "Back facing", Lapel position of "Front bodice", "Decorative belt", and "Collar".

* Cut the Lapel part of "Front facing fusible interlining" and attach it to the Lapel part of "Front bodice".

(2) Create a "Dummy pocket" at the Dummy pocket position and stitch it in place.

(3) Stitch the facing, press seam allowances open with an iron, Serge/overlock the outside.

How to Serge/overlock (sewing machine & overlock sewing machine)

(4) Stitch the surface side of the "Collar" without fusible interlining to the facing, press seam allowances open with an iron.

* Make cuts or shape as necessary to smooth out any puckered areas.

(5) Serge/overlock the shoulders and sides of "Front bodice" and "Back bodice", Serge/overlock the sides of "Front bodice side" and "Back bodice side".

(6) Stitch the shoulders and sides of the "Body", press seam allowances open with an iron.

(7) Stitch the "Collar" with fusible interlining to the "Collar" position of the "Body", press seam allowances open with an iron.

* Make cuts or shape as necessary to smooth out any puckered areas.

(8) Serge/overlock the hem of the "Body", stitch the "facing" to the "Body".

How to sew Facing and Hem

* Make cuts or shape as necessary around the Collar area to smooth out any puckered areas.

(9) Sew the darts of the "tail" and press them inward with an iron.

How to sew darts

(10) Sew the left and right sides of the "tail" together to create two pieces, then french seam them and turn them inside out to shape.

* Trim excess seam allowances when turning inside out.

(11) Align the "tail" with the Tail alignment position of the "Body", sew it to the "Body", aligning the hem allowances of the "Body", fold 1cm (or 0.5in) inward with an iron, and stitch to secure.

(12) Serge/overlock both sides of the "Inside Sleeve" and "Outside Sleeve", then stitch the sides of the "Inside Sleeve" and "Outside Sleeve".

(13) Ease stitch the upper part of the "Sleeve" armhole, serge/overlock the hem, fold 1cm (or 0.5in) with an iron, and sew with a machine.

(14) Attach the "Sleeve" to the "Body", Serge/overlock the armhole.

(15) Create the "Decorative belt" and sew the Decorative button together, then attach them to the "Body" simultaneously.

(16) Sew the Decorative button to the Decorative button position of the "Body".

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---