Sleeveless shirt 2 Sewing Patterns | DRCOS Patterns & How To Make

Simple sewing instructions are included with the paper pattern.

This is a sleeveless shirt pattern with raised shoulders.

The line spreads from the waist toward the hem, creating a voluminous shape.

The collar around the neck is made with fur, and the garment opens and closes with an open-end zipper on the back bodice.

After printing, align and tape the pages along the joining lines, then cut out the pattern. Seam allowances are already included, so you can use the pattern as it is.

(1) Sew the center front of the "Front bodice" to the side of the "Front bodice side". Press the seam allowances open, stitch to secure, and trim the excess seam allowance.

(2) Sew the side of the "Front bodice side" to the side of the "Back bodice" up to the side seam end point. Press the seam allowances open, stitch to secure, and trim the excess seam allowance.

(3) Sew the shoulders. Press the seam allowances open and stitch to secure (do not trim the seam allowance).

(4) Fold the neckline and armholes by 1 cm (0.5 in) in advance and press with an iron.

* After folding, make small cuts in areas where the fabric pulls to help it lay flat.

* Apply stay tape to the zipper attachment area on the main fabric only.

How to use stay tape

(5) Make the lining in the same way as steps (1) to (4).

(6) Sew the hem of the main fabric and lining together, then press to set the shape.

* If it is difficult to shape with an iron, stitch to secure.

(7) Sew the neckline while inserting the "Collar" between the layers.

* It is easier if the fur of the "Collar" is lightly hand sewn in advance.

(8) Insert the open zipper between the main fabric and lining, and sew to attach.

(9) Layer the main fabric and lining at the armholes and stitch to secure without distorting the shape.

If you cannot see the SHOP due to 403 error

Price: ¥600 (JPY)
Approx. USD — / EUR — (for reference)

---

---