Oversize Tail Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is a pattern for creating an oversized, fluffy, and bouncy tail along with a belt for the tail.

We've used 10mm polyurethane foam material inside to stabilize the shape.

Since most of the production process involves hand sewing, it will take quite a bit of time to make.

However, you can adjust the size by changing the scale, so please scale it to your desired size before use.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

The production process is explained with translation software.

Fur Making Process

* Be sure to have a lint roller ready before cutting.

* Before sewing the fur, ensure that the foam interior is completed.

* When cutting fur fabric, place the pattern on the lining and cut only the fur fabric while scooping it up.

* After cutting, it's safer to remove the loose fur with a lint roller beforehand.

* When cutting, please pay attention to the direction of the fur according to the cutting diagram.

(1) Hand-sew the sides of each part together.

* Sew with larger stitches to scoop up the surface.

(2) Once each part is done, sew together in the following order: Gold fur (7) - Brown fur (6) - Gold fur (5) - Brown fur (4) - Gold fur (3) - Brown fur (2).

(3) Before sewing the last gold fur (1), insert the foam inside.

* Carefully insert the foam while compressing it.

(4) After inserting the foam, sew the last gold fur (1) part, making sure to sew it securely to prevent the foam (1) part from shifting.

Foam Form Process

(1) Hand-sew the sides of each part together.

* It is recommended to reinforce with wood glue when sewing.

* Sew with larger stitches to scoop up the surface.

(2) Once each part is done, sew together in the order of (6) - (5) - (4) - (3) - (2) - (1).

"Belt" Making Process

"Belt" is the final step.

* "Belt" is drawn large, so please cut it to fit the wearer's waist before sewing.

(1) Hand-sew the tail to the hole part.

(2) Sew the "belt" pieces together and attach the Velcro.

If you cannot see the SHOP due to 403 error

Unisex-F size

Can be downloaded

27sheets of A4 size(or legal size)

Currently, only Japanese patterns are available.