Comments are made using translation software.
This is a pattern for the sleeves of a kimono, commonly seen in cosplay costumes.
The sleeves are designed to be adjustable to fit different arm sizes by threading elastic through the armhole section.
After printing, paste it according to the pasting line,Cut and use.
The pattern has a seam allowance, so it can be used as is.
The production process is explained with translation software.
(1) Make buttonholes on the right side, first making holes in advance.
(2) Attach the right side and lining from the Lower sleeve edge Sewing stop position to the "Sleeve" hem in an L shape, and then shape with an iron.
(3) Stitch the lower part of the armhole on the right side and lining up to the Sewing stop position, and press open the seam allowance with an iron.
(4) Stitch the Lower sleeve edge on the right side and lining together and shape with an iron.
(5) Stitch the open part at the bottom of the side on the right side and lining together, and shape with an iron.
(6) Finish the armhole section with bias tape.
* Leave openings in the bias tape for inserting elastic.
(7) Insert elastic into the armhole section.
(8) Thread the string alternately through the buttonholes.
How to purchase pay pattern from overseas
If you cannot see the SHOP due to 403 error
upperarms8.3-9.1in sleevelength16.3in length37.4in 20sheets of A4 size(or legal size)
upperarms9.4-10.2in sleevelength16.3in length38.2in 21sheets of A4 size(or legal size)
upperarms10.6-11.4in sleevelength16.7in length39in 22sheets of A4 size(or legal size)
How to make buttonholes
Paper pattern & how to make
How to use Paper pattern
Each process How to make
Shop
X(Twitter)
pinterest
Instagram
facebook
Contact Us/Q&A
Japanese Site