Jumper skirt 2 Free Paper pattern & How to make DRCOS

I'm not so good a English.

The explanation uses machine translation.

machine translation may make mistakes in making English sentences.

This is a free pattern of Jumper skirt 2.

It's with margins for seams for beginners.

The production process is explained with translation software.

If you have any suggestions on how to write like this, please let us know at info@dr-cos.com

We operate this site with your cooperation.

(1) Sew the darts of "Front Bodice", "Back Bodice", "Front Skirt" and "Back Skirt" and iron down the seam allowance.

(2) Serging the sides of "Front Bodice" and "Back Bodice", sew the shoulders and sides together, and iron down the seam allowance.

(3) Iron on fusible interlining to "Front Facing" and "Back Facing", sew the shoulders and sides together, and iron down the seam allowance.

(4) Serging the hem of "Facing", fold it in 0.5 inch to the front side, and sew it with a sewing machine.

(5) Fold in the armholes of "Bodice" and "Facing" by 0.5" with an iron to make it easier to sew later.

* This step is not necessary if the armholes are to be pulled out and sewn together.

(6) Serging the sides of "Front Skirt" and "Back Skirt", sew the sides of "Front Skirt" and "Back Skirt" together and press seam allowances open with an iron.

* Do not Serging the rear center position of the rear skirt yet.

(7) Iron in the pleat fold line.

* When ironing the folds, use a pleat spray to stabilize the shape.

* Use stitching to secure the back of the folds for a clean finish.

(8) Iron the pleat fold lines so that they overlap.

* Sew the + portion in front of the front folds and settle the upper part of the folds with stitching to make a clean line

(9) Sew "Bodice" and "Skirt" together, iron the seam allowance and turn it downwards.

(10) Serging at the center back, and then, stay tape is attached at the zipper position.

(11) Sew from the hem at the center back to the zipper position, and press seam allowances open with an iron.

(12) Serging the hem of the "Skirt", iron 1" up and sew it to the stop.

(13) Sew on the invisible zip.

(14) Sew "Facing" around the neck of "Bodice" and iron the seam allowance.

* Cut the vine part of the seam allowance around the neck and let it settle.

(15) Match the armholes and sew them together.

* Armholes can be pulled out in half and sewn together.

(16) Sew the seam allowance at the back center of "Facing" to the seam allowance of the zipper.

Free Paper Pattern is supported by your help in spreading the word!
If you use Paper pattern, please post it on social networking sites and tell your friends about it!
Please help spread the word about DRCOS for future operations!