Hakama Pants Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is a pattern for pants designed to be worn like trousers but featuring pleats all the way to the hem, resembling hakama.

Wearing them is as easy as putting on regular pants.

Since they have a pant-like shape, there are no openings on the sides like traditional hakama.

They are designed to be worn adjusted to the waist, ensuring a clean fit without strain on the pleats.

There are cut lines every 2cm at the hem, allowing for adjustments to the inseam length at the pattern stage.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

(1) Fold the "Pleat bottom fold line" and "Pleat top fold line" of the body with an iron.

(2) After sewing the sides and inseam of "Front bodice" and "Back bodice",Serge/overlock,Iron it to one side.

How to Serge/overlock (sewing machine & overlock sewing machine)

(3) Finish the zipper part.

* For the Zipper part, please refer to

How to sew a zipper on pants

(4) After Serge/overlocking the hem,Fold up 1cm with an iron,Sew with a sewing machine.

(5) Iron the pleats firmly to finish the shape.

(6) Apply fusible interlining to the "belt", Sew the belt on the pleats.

* To prepare the "belt", please refer to

Preparation of belt section

(7) Sew the "belt loop".

(8) Make buttonholes at the buttonhole positions,Sew a button at the buttonhole position.

* See here how to make buttonholes and sew buttons in place

How to sew on buttons

How to make buttonholes

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---