Dress Shirts Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is a pattern for the basic shirt, which was highly requested to complement the basic pants.

It features a stand collar with a collar stand, a double-layered yoke at the back, and cuffs with a slit opening, making it a basic shirt pattern.

You can make various shirts such as a white TC broadcloth shirt, checkered pattern shirts for daily wear, or shirts for winter using thick fabrics.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

(1) Apply fusible interlining to the "Collar", "Collar stand", and "Cuff".

(2) Fold the darts on the "Back bodice" towards the center line, then sandwich the back "Body" between two yokes and sew them together.

(3) Sew the "pocket" onto the "Front bodice".

(4) Fold the fold lines on the "Front bodice" inward twice, iron, and sew the edges with a sewing machine.

(5) Sew the shoulder seams of the "Front bodice" and "Back bodice" together, then serge/overlock and press the seam allowance (S/A) towards the "Back bodice" side.

How to Serge/overlock (sewing machine & overlock sewing machine)

(6) Cut the opening of the sleeve into a Y-shape.

(7) Sew the under strip to the lower side of the sleeve.

(8) Sew the upper strip to the upper side of the sleeve.

(9) Attach the sleeve top to the "Body", serge/overlock the seam allowance (S/A).

(10) Sew the side seam from the sleeve opening to the "Body", then serge/overlock. Press the seam allowance (S/A) towards the "Back bodice" side.

(11) Sew the "Collar" and press to shape it, then attach the "Collar stand".

How to make collar

How to sew Collar stand

(12) Sew the "Collar stand" by sandwiching the edge of the "Collar" on the "Body".

(13) Fold and press the sleeve opening towards the opening, then iron.

(14) Sew the "Cuff" together and press to shape it.

(15) Attach the "Cuff" by sandwiching the sleeve opening.

* The "Cuff" is drafted about 5mm smaller, so adjust while aligning.

(16) Serge/overlock the hem of the "Body", fold it inward by 1 centimeter, and sew on a sewing machine (3-fold without serger/overlock is also acceptable).

(17) Make buttonholes and sew on buttons.

How to sew on buttons

How to make buttonholes

If you cannot see the SHOP due to 403 error

Children-140 size

Can be downloaded

shoulder width15.4in bust33.1in Waist30.5in 12sheets of A4 size(or legal size)
Sleeve parts 38 size

---

Ladies'-S size

Can be downloaded

shoulder width17.1in bust37.8in Waist35in 15sheets of A4 size(or legal size)
Sleeve parts 41 size

---

Ladies'-M size

Can be downloaded

shoulder width17.5in bust40.2in Waist37.4in 16sheets of A4 size(or legal size)
Sleeve parts 46 size

---

Ladies'-L size

Can be downloaded

shoulder width18.1in bust43.3in Waist40.6in 17sheets of A4 size(or legal size)
Sleeve parts 49 size

---

Ladies'-LL size

Can be downloaded

shoulder width18.5in bust46.3in Waist43.5in 18sheets of A4 size(or legal size)
Sleeve parts 50 size

---

Men's-L size

Can be downloaded

shoulder width19.7in bust47.2in Waist44.7in 20sheets of A4 size(or legal size)
Sleeve parts 55 size

---

Men's-LL size

Can be downloaded

shoulder width20.1in bust50in Waist46.3in 21sheets of A4 size(or legal size)
Expanded sleeve parts 56 sizes to 108.4%