Cummer vest Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is a pattern for a camisole vest, known as a backless vest, without a back.

It's a vest that is often used for dancing or parties, but it can also be worn formally.

Recently, it's been seen worn in cafes as well, making it ideal as a base material for cosplay.

The back band section is designed for button closure, but you might also consider finishing it stylishly with belt band hardware.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

The production process is explained with translation software.

(1) Sew the darts on the bodice and the lining, and press them with an iron.

How to sew darts

* Press the darts on the bodice towards the center, and the darts on the lining towards the outside.

(2) Sew the bodice together at the neckline and press the seam allowances open with an iron.

(3) Similarly, sew the lining together at the neckline and press the seam allowances open with an iron.

(4) Sew the outer fabric and lining together into a bag shape, from the starting point of sewing to the ending point of sewing.

(5) Clip the corners of the seam allowances and trim the fabric where needed, then turn it inside out and press it with an iron to shape it.

(6) Close the turning gap with blind stitching.

* If it's difficult to shape with the iron, stitch around the entire edge.

(7) Make buttonholes and sew on the buttons.

How to sew on buttons

How to make buttonholes

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---