Stand Collar Jacket 1 Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

Here is the pattern for the jacket with a large stand collar, as requested by many.

The shoulder width is designed to be slightly wider, and the sleeve length is shorter and wider.

The bust area is also generously sized, and there are no darts or shaping in the bodice, so it's made to fit loosely and be oversized.

The neckline is wider than usual, and the stand collar is designed to extend outward.

If you also want a lining, there is a line for the facing included, so you can create your own lining pattern from there.

This design is made to be very easy to work with as a base material for modifications.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

(1) Apply fusible interlining to the "facing" (right and left front), "facing" back, and "Collar stand."

(2) Sew together the "facing" (right and left front) and "facing" back, press open the seam allowance with an iron, and serge/overlock the outer edges.

How to Serge/overlock (sewing machine & overlock sewing machine)

(3) Sew together the "Collar stand," then turn it inside out and iron to shape it.

(4) Serge/overlock the shoulder and side of the "Front bodice," the shoulder and side of the "Back bodice," the back center line of the "Back bodice," and both sides of the "Sleeve."

(5) Sew together the back center line of the "Back bodice," the shoulder and side of the "Body," and press open the seam allowance with an iron.

(6) Serge/overlock the hem of the "Body," then sandwich the "Collar stand" between the "Body" and the "facing" and sew them together.

How to sew Facing and Hem

(7) Sew together the "Sleeve" and press open the seam allowance with an iron.

(8) Serge/overlock the hem of the "Sleeve," then fold it up 1cm (0.5in) on the inside and sew it on a sewing machine.

(9) Attach the "Sleeve" to the "Body."

(10) Serge/overlock the armhole after attaching the "Sleeve."

(11) Create buttonholes on the "Body" and sew on buttons.

How to sew on buttons

How to make buttonholes

(12) Sew on snaps to complete.

How to Sew on snap

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---

---