Rabbit ear hoodie Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

Here is the pattern and instructions for making a hoodie with rabbit ears attached.

Adding ribbed cuffs and hem can make it cute.

It's also recommended to use various fabric colors for making.

Since the pattern is a simple structure without facings or lining, it's recommended to customize it according to your imagination.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

The production process is explained with translation software.

(1) Stitch the darts on the "Front bodice" and "Back bodice", then iron and fold the seam towards the center.

How to sew darts

(2) Attach the "pocket" to the designated position.

* Depending on your preference, you can attach the "pocket" on one side or both sides.

(3) Serge/overlock the front "Back bodice" shoulder and side, then stitch them together and press open the seam allowance with an iron.

How to Serge/overlock (sewing machine & overlock sewing machine)

(4) Apply fusible interlining to the "Collar" and "Collar stand".

(5) Align the "Collar" with right sides together, stitch along the "Collar stand" part, flip it inside out, and iron.

* When flipping, cut the tip of the seam allowance (S/A) by about 2mm.

(6) Align the "Collar stand" with right sides together, sandwich the "Collar" in between, stitch together, flip it inside out, and secure with topstitching.

* It's easier to sandwich the "Collar" stand if you first fold the seam allowance (S/A) by 1cm (0.5in) with an iron on the side where it attaches to the "Body".

(7) Iron the fold lines on the "Front bodice" twice and stitch them in place.

* You can fold the lines either towards the front or back, whichever you prefer.

(8) Iron the 3fold lines on the "Front bodice" and stitch them in place with topstitching.

(9) Sandwich the "Body" between the "Collar stand" and sew on a sewing machine.

(10) Serge/overlock the sides of the "Sleeve", stitch them together, press open the seam allowance with an iron, insert gathers at the gathering positions.

(11) Apply fusible interlining to the Lower sleeve edge, stitch the sides together, fold and tuck the seam allowance (S/A) by 1cm (0.5in) to create a sandwichable state.

(12) Attach the Lower sleeve edge to the hem of the "Sleeve".

(13) Attach the "Sleeve" to the "Body" and serge/overlock.

How to sew sleeves

(14) Process the hem of the "Body" with bias tape or serge/overlock, then fold up by 1cm (0.5in) and sew on a sewing machine.

How to make bias tape

How to sew bias tape

(15) Create buttonholes and sew on the buttons.

How to sew on buttons

How to make buttonholes

If you cannot see the SHOP due to 403 error

Ladies'-S size

Can be downloaded

bust34.6in shoulder width15.7in 16sheets of A4 size(or legal size)
Sleeve parts 44 size

---

Ladies'-M size

Can be downloaded

bust37.5in shoulder width15.7in 17sheets of A4 size(or legal size)
Sleeve parts 47 size

---

Ladies'-L size

Can be downloaded

bust40.1in shoulder width16.3in 18sheets of A4 size(or legal size)
Sleeve parts 49 size