Oversize Hoodie Sewing Patterns | DRCOS Patterns & How To Make

This is a sewing pattern for the oversized hoodie requested by our users.

Please note that its measurements are not intended for normal everyday clothing.

The sleeves are extremely long from the neckline to the cuffs, so the hands will not extend beyond the sleeve openings.

The sleeves are also very wide, and the bodice becomes wider toward the hem.

The garment length is also much longer than expected, so please check the measurements carefully before purchasing.

The hood has a special rounded shape that is different from a standard hood.

The neckline and bust are drafted for each size, but all other parts are intentionally oversized.

This pattern is designed mainly as a base for cosplay costumes and may be difficult to use for other purposes.

Only basic sewing instructions are included with the pattern.

After printing, align the pages along the guide lines, paste them together, and cut out the pattern pieces. Seam allowances are included, so you can use the pattern as-is.

(1) Baste the Sleeve Decorations to both Sleeves, then attach bias tape.

How to make bias tape

How to sew bias tape

(2) Sew bias tape to the Pockets.

(3) Sew the Pockets to the Bodice.

(4) Sew the top edges of the Lower Hood pieces together and press the seam allowances open. Repeat for the Lining.

* For a cleaner shape, topstitch the seam allowances open and trim away the excess fabric.

(5) Apply slightly heavy fusible interfacing or fusible batting to the Upper Hood Lining.

(6) Sew the Upper Hood and Lower Hood together and press the seam allowances open. Repeat for the Lining.

* For a cleaner shape, topstitch the seam allowances open and trim away the excess fabric.

(7) Apply stay tape to the zipper positions on the Front Bodice and Hem Rib.

How to use stay tape

* This step is not necessary if you are not attaching a zipper.

(8) Sew the center back seam. Sew the side seams of the Front Bodice and Back Bodice, then press the seam allowances open. Repeat for the Lining.

(9) Sew the Sleeve underarm seams and press the seam allowances open. Repeat for the Sleeve Lining.

(10) Sew the Sleeve Ribs to the Sleeves and finish the raw edges.

How to Serge/overlock (sewing machine & overlock sewing machine)

(11) Sew the Sleeves to the Bodice and press the seam allowances open. Repeat for the Lining.

(12) Sew the Hood to the Bodice and press the seam allowances open.

(13) Sew the Hem Rib to the Bodice and Lining.

(14) Attach the zipper at the marked zipper position.

* When using a metal zipper, having a craft store adjust it to the required length will make the work easier.

(15) Finish the Hood opening with bias tape.

* To help keep the shape, insert garment wire or a similar material inside the bias tape.

(16) Sew the buttons to the Pockets.

If you cannot see the SHOP due to 403 error

Price: ¥700 (JPY)
Approx. USD — / EUR — (for reference)

---

---

---

---

---

---