This is a sewing pattern for a simple tunic-style hoodie.
It is also suitable for loungewear or casual clothing.
The hood is included in the pattern. If you do not need the hood, you can finish the neckline with bias tape.
The sleeve pattern is made for long sleeves, but short sleeve cut lines are also included.
After printing, align the pages along the guide lines, paste them together, and cut out the pattern pieces. Seam allowances are included, so you can use the pattern as-is.
*Please press all sewn seams with an iron.
(1) Finish the raw edges of the shoulder seams and side seams of the Front Bodice and Back Bodice.
(2) Sew the shoulder seams and side seams of the Front Bodice and Back Bodice together. Press the seam allowances open with an iron.
(3) Fold the hem of the Body to the wrong side by 1 cm (0.5 in), then topstitch.
(4) Make drawstring holes at the marked positions on the Hood using buttonholes or eyelets.
(5) Sew the center back seam of the Hood. Finish the raw edges and press the seam allowance to one side with an iron.
(6) Fold the front edge of the Hood into a double fold and stitch it in place.
(7) Attach the Hood to the neckline of the Body, then finish the seam allowance.
(8) Finish the raw edges from the underarm to the hem of each Sleeve. Sew the underarm seam and press the seam allowance open with an iron.
(9) Fold the sleeve hem to the wrong side by 1 cm (0.5 in), then topstitch.
(10) Attach the Sleeves to the Body, then finish the armhole seam allowance.