Napoleon Collar Coat Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is the pattern for the Napoleon collar coat, as requested.

It includes the lining pattern as well, so there are a few extra pieces.

Unlike traditional coats with a loose fit, this design is quite tight and streamlined, eliminating unnecessary bulk.

The bust and waist measurements are based on the actual size of the pattern, so it's recommended to go up one size for a more comfortable fit.

The pattern allows for two variations: one with lapels folded down as shown in the illustration, and another with buttons to fasten.

It's also recommended as a base pattern for making military-style coats or Napoleon collar coats.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

The production process is explained with translation software.

* In this construction process, the seam allowance of the armhole is exposed on the inside of the body.

* If you want to hide the seam allowance of the armhole on the inside as well, when sewing the body and lining together, pull it out from the inside and process the armhole.

(1) Apply Fusible interlining to the “Collar”, “Collar stand”, “Front facing”, “Back facing”, “Fake welt”, “welt fabric”, “sleeve decorative belt”, and “Epaulet”.

* For the lapel part of the “Front facing”, cut the fusible interfacing and apply it to the lapel part of the “Front bodice”.

(2) Sew the “Collar” to form its shape.

(3) Make the “sleeve decorative belt” and “Epaulet”, and create buttonholes.

How to sew on buttons

How to make buttonholes

(4) Sew the “Fake welt” to the left chest of the “Front bodice”.

(5) Make the Welt Pocket on the “Front bodice”.

How to sew Welt pocket

(6) Sew the shoulders, sides, and center back of the “Front bodice” and “Back bodice”, and press the seam allowances open with an iron.

(7) Sew the shoulders, sides, and center back of the “Front bodice lining” and “Back bodice lining”, and press the seam allowances open with an iron.

(8) Sew the “Front facing” and “Back facing” together, and press the seam allowances open with an iron.

(9) Sew the “Facing” and “lining” together, and press the seam allowances towards the body with an iron.

(10) Align the “sleeve decorative belt” with the sleeve decorative belt position, sew the sides of the “Sleeve” and “Sleeve lining”, and press the seam allowances open with an iron.

(11) Sew the sleeve cuffs with the inner side facing, and press with an iron.

(12) With the right sides facing, sew the “bodice” and “lining” together from one cut position to the opposite cut position.

(13) Trim the seam allowances at the corners of the lapel and hem, make notches at the cut position, turn it to the right side, and press with an iron.

(14) Sandwich the neckline of the “bodice” with the “Collar stand” and sew it.

(15) Align the “Epaulet” at the shoulder position and sew the “Sleeve” in place.

How to sew sleeves

(16) Serge/overlock the armholes.

How to Serge/overlock (sewing machine & overlock sewing machine)

(17) Create buttonholes and sew on the buttons.

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---