Comments are made using translation software.
Simple instructions are provided on the pattern.
This is the pattern for Cropped Pants II (Straight), which includes side pockets and a back pocket.
The back is designed with a yoke to give a rounded shape, so using a stretchy jeans fabric is also recommended.
We are planning to draft three patterns for cropped pants: tight, straight, and wide.
The rise is slightly low, so please carefully check the measurements.
After printing, align the assembly lines, tape the pieces together, and cut them out for use.
Seam allowances are already included in the pattern, so you can use it as is.
The production process is explained with translation software.
(1) Sew the "Yoke" to the "Back bodice", serge/overlock the seam allowance (S/A), and press the seam allowance (S/A) down with an iron.
How to Serge/overlock (sewing machine & overlock sewing machine)
(2) Sew the "Back pocket" onto the "Back bodice".
(3) Construct the "Side pocket" on the "Front bodice".
(4) Sew the sides and inseam of the "Front bodice" and "Back bodice", serge/overlock, and press the seams to one side.
(5) Attach the zip.
(6) Serge/overlock the hem, fold it up 2 cm, and stitch with a sewing machine.
(7) Apply Fusible interlining to the "belt" and sew it together.
(8) Sew the "belt" onto the "bodice" while sandwiching it in.
(9) Attach the "Belt loop".
(10) Create a buttonhole at the designated position and sew on the button at the button location.
How to purchase pay pattern from overseas
If you cannot see the SHOP due to 403 error
W65.5cm H81cm Rise 19.5cm (belt not included) 10sheets of A4 size(or legal size)
W71cm H87cm Rise 21cm (belt not included) 12sheets of A4 size(or legal size)
Paper pattern & how to make
How to use Paper pattern
Each process How to make
Shop
X(Twitter)
pinterest
Instagram
facebook
Contact Us/Q&A
Japanese Site