Bowtie 1 Semi-butterfly Sewing Patterns | DRCOS Patterns & How To Make

This is a paper pattern and instructions for a semi-butterfly type bow tie.

This is not a one-touch installation type, but a full-fledged one that is attached by tying.

It is very easy to make, so it is also recommended for remaking used neckties, etc.

Although the drawing is made to fit the neck circumference, please select the size according to the neck circumference of the shirt, etc. to be worn.

We hope you will find it useful for your presentations, parties, and cosplay!

After printing, paste the paper along the dotted lines and cut it to use.

Paper pattern has a seam allowance (S/A), so it can be used as is.

The production process is explained with translation software.

If you have any suggestions on how to write like this, please let us know at info@dr-cos.com

We operate this site with your cooperation.

(1) Attach fusible interlinings to the "Body" and sew them together at the notch mark.

(2) Cut the seam allowance and turn inside out.

(3) Iron into shape and sew around the perimeter.

* For a clean finish, use a cardboard pattern, iron, cut into the seam allowance, and stitch around the seam allowance.

Free Paper Pattern is supported by your help in spreading the word!
If you use Paper pattern, please post it on social networking sites and tell your friends about it!
Please help spread the word about DRCOS for future operations!

---

---

---

---

---

---

---

---