Apron Dress Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

The sleeves are two-tiered drop cuffs.

This is a pattern for a dress with a two-tiered skirt cut-out.

The back part is a 56cm invisible zip with lace inserted at various places.

It is a little bit difficult to make the dress with ease stitches and gathers.

The skirt is 210 degrees wide, so it will spread beautifully if you wear long panniers.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

(1) Apply fusible interlining to the "facing" and sew together, press open the seam allowance (S/A) with an iron.

(2) Sew the darts on the "Front bodice" and "Back bodice", then iron and fold the seam towards the center.

How to sew darts

(3) Parts to be serged/overlocked in advance:

How to Serge/overlock (sewing machine & overlock sewing machine)

* Around the outer edge of the "facing"

* Shoulders and sides of the "Front bodice" and "Back bodice", "Back bodice" center

* Upper part of the "Sleeve" side and hem

* Side parts of the upper and lower sections of the skirt

(4) Sew together the shoulders and sides, press open the seam allowance with an iron.

(5) Sew together the upper section of the skirt, press open the seam allowance with an iron, serge/overlock the hem portion.

* Sew until the sewing stop position for the zipper part.

(6) Sew together the lower section of the skirt, press open the seam allowance with an iron, serge/overlock the upper and lower parts.

(7) Sandwich lace into the apron and sew with a bag stitch, then topstitch around the reverse side.

(8) Insert the apron between the "Body" and upper section of the skirt, sew together, serge/overlock.

(9) Apply stay tape to the zipper attachment position and attach the zipper.

How to use stay tape

(10) Attach the "facing" to the "Body" and tack the end to the zipper.

(11) Attach lace to the hem of the lower section of the skirt, and attach it together with lace to the upper section of the skirt.

(12) Sew together the upper part of the "Sleeve" side, put ease stitches at the armhole part, gather at the "Sleeve" attachment position.

(13) Sandwich lace into the "Sleeve" and sew with a bag stitch, then topstitch around the reverse side.

* Please attach "Cuff" or buttons to the "Sleeve".

(14) Serge/overlock the seam allowance (S/A) at the lace attachment position under the "Sleeve" and fold 1cm, hide the seam allowance (S/A) with lace and sew.

(15) Attach the upper and lower parts of the "Sleeve" to the "Sleeve" and serge/overlock.

* Attach them so that the seam between the "Sleeve" and the lower part of the "Sleeve" comes to the front side.

(16) Attach the "Sleeve" to the "Body" and serge/overlock the armhole.

If you cannot see the SHOP due to 403 error

Ladies'-S size

Can be downloaded

bust31.5in waist25.2in 28sheets of A4 size(or legal size)
Sleeve parts 40 size

---

Ladies'-M size

Can be downloaded

bust33.9in waist27.2in 28sheets of A4 size(or legal size)
Sleeve parts 41 size

Currently, only Japanese patterns are available.

---

Ladies'-L size

Can be downloaded

bust36.6in waist29.9in 32sheets of A4 size(or legal size)
Sleeve parts 44 size

Currently, only Japanese patterns are available.