Princess Onepiece Dress 3 Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

Using it as a base pattern for princess-line dresses is also recommended.

The skirt has a flare of approximately 305 degrees, so wearing a panier will make the dress quite voluminous.

The neckline features a stand collar with both a collar stand and under collar.

The sleeves have a slightly flared straight line.

It looks incredibly cute when worn with a panier underneath.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

(1) Apply fusible interlining to the "Collar" and "Collar stand" with an iron.

(2) Stitch the "Collar" first, then sandwich it between the "Collar stand" and sew them together.

(3) Fold the "Collar stand" on the "Body" side by 1cm (0.5in) with an iron to make it easier to sandwich.

(4) Serge/overlock all sides, shoulders, and both sides of the "Sleeve" on the "Body".

How to Serge/overlock (sewing machine & overlock sewing machine)

(5) Stitch the back center line of the "Back bodice" up to the sewing stop position, then press open the seam allowance (S/A) with an iron.

(6) Apply stay tape at the zipper position and sew on the zipper.

How to use stay tape

(7) Stitch all sides and shoulders of the "Body", divide the seam allowance (S/A) with an iron, then open the seam allowance with topstitching.

(8) Serge/overlock the hem of the "Body", then fold it up 1cm (0.5in) with an iron and sew on a sewing machine.

* Using iron-on adhesive tape like Dyna Tape for the hem also yields a clean finish.

(9) Stitch the sides of the "Sleeve", divide the seam allowance (S/A) with an iron, serge/overlock the "Sleeve" hem, then fold it up 1cm (0.5in) with an iron and sew on a sewing machine.

(10) Attach the "Sleeve" to the "Body" and serge/overlock the armhole.

How to sew sleeves

(11) Attach the "Collar" to the "Body" while sandwiching the "Collar stand", then attach the Hook & Bar Eye.

How to sew the hook

How to sew a hook "bar eye" version

If you cannot see the SHOP due to 403 error

Children-140

Can be downloaded

bust29.5in waist22.4in length31.5in 20sheets of A4 size(or legal size)
Sleeve parts 37 size

---

Ladies'-S size

Can be downloaded

bust33.5in waist25in length34.4in 24sheets of A4 size(or legal size)
Sleeve parts 41 size

---

Ladies'-M size

Can be downloaded

bust36in waist27.8in length35.6in 27sheets of A4 size(or legal size)
Sleeve parts 43 size

---

Ladies'-L size

Can be downloaded

bust39.4in waist30.9in length36.8in 27sheets of A4 size(or legal size)
Sleeve parts 47 size

---

Ladies'-LL

Can be downloaded

bust41.7in waist32.7in length38.4in 31sheets of A4 size(or legal size)
Sleeve parts 51 size

---

Men's-L size

Can be downloaded

bust43.3in waist33.9in length39.4in 33sheets of A4 size(or legal size)
Sleeve parts 54 size

---

Men's-LL size

Can be downloaded

bust45.3in waist35.8in length40.9in 33sheets of A4 size(or legal size)
Expanded sleeve parts 56 sizes to 103.1%