High waistline skirt Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is a pattern and instructions for a high-waisted skirt with a spread of 168 degrees.

The high waist gives the effect of slightly longer legs!

This line is necessary to express 2-dimensional animation.

Since the design drapes a little, we recommend using a fabric with a falling texture.

Use 22cm invisible zip when making this pattern.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

(1) Sew darts together, Serge/overlock the seam allowance (S/A), Defeat darts with an iron

How to sew darts

How to Serge/overlock (sewing machine & overlock sewing machine)

(2) Serge/overlock both sides of "Front bodice", "Back bodice", "Front bodice side", and "Back bodice side"

(3) Sew two pieces at Zipper position up to Sewing end position, apply stay tape

How to use stay tape

(4) Press seam allowances open with an iron, attach invisible zip

(5) Sew together all sides of "Body", Press seam allowances open with an iron

(6) Serge/overlock Skirt hem, fold up with an iron and sew with a sewing machine

(7) Apply seam allowance (S/A) to "Front facing" and "Back facing", sew one side together, Serge/overlock

(8) Attach "facing" to "Body", turn inside out and sew with topstitch

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---