A sewing pattern for a detachable collar (fake collar).
This fake collar makes it look like you are wearing a layered shirt without wearing a full shirt.
The design is a simple stand collar. It can also be used as a base pattern to change the collar shape or add lace decorations.
The collar size is made based on your neck measurement. You can choose a size that fits your neck closely or a size with extra ease.
After printing, align the pages using the joining lines, tape them together, and cut out the pattern pieces.
The pattern includes seam allowance, so you can use it directly after cutting.
(1) Finish the raw edges of the shoulder seams of the front and back pieces. Sew the shoulders together and press the seam allowances open with an iron.
How to Serge / Overlock (sewing machine & overlock sewing machine)
(2) Apply fusible interfacing to the collar.
(3) Sew the collar pieces together. Turn the collar right side out and press it with an iron to shape it.
(4) Fold the fold lines of the body pieces and press them with an iron. Sew along the folded edge with a sewing machine.
* Fold the hem edge to the inside to finish the edge.
(5) Place the body pieces between the collar pieces and sew them together.
* If the body edges extend outside the collar seam, make small notches and fold them inside to finish.
(6) Finish the raw edges around the body pieces. Fold the edge 1 cm to the inside, press with an iron, and sew.
* Fold the hem edge to the inside to finish the edge.
* Bias tape finishing can also be used around the body edges.
(7) Attach elastic at the elastic attachment positions.
(8) Make buttonholes and sew the buttons in place.
Free Paper Patterns are possible because of your support.
If you use our patterns, please share them on social media and tell your friends.
Your support helps DRCOS continue to provide patterns in the future.