Bell Line Dress Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

This is a pattern for a bell line dress that can be used as a base for a wedding dress, which has been requested by many customers.

The skirt is a circular 360 degree dress with an adjustable skirt length from 45cm to 95cm.

The upper part of the dress is lined to prevent transparency.

The waist part is tightly squeezed to create a fuller line when wearing panniers.

The design is tightened tightly, so the pattern will be a little tight.

Even if the size is listed as "M" for women, it will be slim, so please check the actual size.

It has a simple structure and is recommended as a base pattern.

After printing, paste it according to the pasting line,Cut and use.

The pattern has a seam allowance, so it can be used as is.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

* Since this design does not include shoulder straps, if you would like to add straps, you can insert loops into the facing to attach commercially available bra straps.

(1) After sewing the side seams of the “Front bodice,” “Front bodice side,” “Back bodice side,” and “Back bodice,” press the seam allowances open.

* Be careful not to sew the center back of the “Back bodice” since the zipper will be attached there.

(2) After overlocking/serging the side seams of the “Skirt,” sew the center back of the “Back bodice” to the “Sewing end position,” then press the seam allowances open.

How to Serge/overlock (sewing machine & overlock sewing machine)

(3) After sewing the side seams of the “Skirt,” press the seam allowances open.

(4) After finishing the hem of the “Skirt,” fold the seam allowances and sew with a sewing machine.

* The hem can be processed with a 3-fold (2-fold) or double turn method.

(5) Sew the “bodice” and “Skirt” together at the side seams, serge/overlock, then press the seam allowances upwards.

(6) Apply stay tape to the zipper area and attach the zipper.

How to use stay tape

(7) Apply fusible interlining to the “Front Facing” and “Back Facing.”

(8) After sewing the “Facing” pieces together, press the seam allowances open.

(9) After sewing the side seams of the “Front lining,” “Front lining side,” “Back lining side,” and “Back lining,” press the seam allowances open.

(10) Attach the “Lining” to the “Facing” and press the seam allowances down.

(11) After sewing the “bodice” and “Facing” together, press the shape into place.

(12) Sew the “Lining” to the seam allowances at the zipper edge.

* For parts that cannot be sewn with a sewing machine, use blind stitching to finish.

(13) Fold the seam allowances of the “Lining” at the hem inward, and secure them to the bodice seam allowances with running stitches or similar methods.

* Adding a spring hook to the top of the zipper will prevent it from opening easily.

How to sew the hook

How to sew a hook "bar eye" version

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---