Heart Collar Jacket 2 Sewing Patterns | DRCOS Patterns & How To Make

Comments are made using translation software.

Here is another type of Heart Collar Jacket, which has been requested frequently.

The changes between Heart Collar Jacket I and II are as follows:

In Heart Collar Jacket I, the design didn't allow for closing the front, whereas in II, it's designed to be closable.

Additionally, the shape of the sleeves has been significantly altered, with the seam allowance folded to the wrong side and a slight ease stitch added.

Please use this as a base for your modifications.

I'm not so good at English.

So all explanations/instructions were translated using AI.

This is not always perfect and I apologise for any parts that are difficult to follow.

This costume does not include a lining pattern.

If you need a lining, please use the facing line on each body part and add seam allowance there.

(1) Wrap the "epaulette" on the bias first and sew it with a sewing machine.Shape it first and make buttonholes.

How to make bias tape

How to sew bias tape

(2) Sew darts and iron the darts.

How to sew darts

(3) Stitch fusible interlining on "facing",Sew "front facing" and "back facing" together,Press seam allowances open with an iron.Serge/overlock the outer part.

How to Serge/overlock (sewing machine & overlock sewing machine)

(4) Attach fusible interlining to "Collar",Wrap it on the bias and sew it with a sewing machine.and sew on the sewing machine to make a shape that can be tucked in.

(5) Serge/overlock the sides and shoulders of the "Front bodice" and the sides, shoulders and back center of the "Back bodice

(6) After sewing "Back bodice" center, "Bodice" shoulder, and "Bodice" sides together,Press seam allowances open with an iron.

(7) Sew up to the seam stop at the "Bodice" and "facing" with the "Collar" in between.

How to sew Facing and Hem

(8) From the collar position at the base of the heart lapel to the collar position at the base of the opposite heart lapel around the hem, sew on the bias.

* The bias at the base of the heart lapel should protrude slightly on the reverse side.

(9) Fold the lapel part with an iron.

(10) After Serge/overlocking the "Sleeve" sides and hem,Sleeve" sides are sewn together,Press seam allowances open with an iron,Iron up the "Sleeve" hem 0.5 inch ≈1cm and sew it with a sewing machine.

(11) Sew the "Sleeve" by inserting the "epaulettes" into the epaulette position of the "Bodice" shoulders,Serge/overlock the armholes.

*Sleeves are in EASE STITCH.

(12) Sew a button at the button position,Make a buttonhole at the Buttonhole Position.

How to sew on buttons

How to make buttonholes

If you cannot see the SHOP due to 403 error

---

---

---

---

---

---